Toll Free: +1.877.234.2502
Tel: +1 705.733.1218
Fax: +1 705.733.1218
Email: sales@saeinc.com
SAE enhanced grounding electrodes offer unparalleled electrical and financial performance over competing approaches, notably:
Conducrete® is a conductive cementitious and carbonaceous material that dramatically enhances the performance, reliability and longevity of grounding systems and cathodic protection systems. The conductive and insulating materials used in the formulation give it a capacitive nature.
Conducrete® offers many advantages:
Conducrete® can store and release energy the same way that a capacitor will store energy until it is grounded or allowed to release the energy into a circuit. The material absorbs high rise time electrical surges keeping ground potential rise in check and preventing damage.
Choose ConduFlow® for the best long-term solution for utility pole, pad mount transformer and tower grounding. ConduFlow® can also be used as backfill for shallow cathodic protection systems. With an expected in-service time that is up to 20x the industry standard by virtually eliminating electrodes corrosion, you can save both money and materials by choosing SAE products for your next application.
ConduFlow® offers many advantages:
ConduFlow® is a liquid conductive carbonaceous polymer backfill that is manufactured for installation in a pourable form. It can be poured on exposed rock surfaces to protect conductors where trenching is not possible. ConduFlow® solidifies and provides corrosion resistance and strength. It can withstand freeze-thaw cycling, prevent accidental damage and theft. ConduFlow® is sold in a five-gallon container.
ConduForm™ is a dust free, conductive carbonaceous backfill material that is installed as a liquid and cures as a solid. ConduForm™ is designed for applications where overburden is shallow or non-existent. It provides superior corrosion and theft protection. It can be poured on exposed rock surfaces to protect conductors and improve grounding where trenching is not possible. With an expected in-service lifetime that is up to 20x the industry standard, electrode corrosion is virtually eliminated.
ConduForm™ offers many advantages:
Increase the reliability of your utility pole network while reducing downtime with SAE’s ConduDisc® utility pole ground plate. The ConduDisc® ground plate virtually eliminates electrode corrosion and lasts up to 60 years — the life of a utility pole.
ConduDisc® offers many advantages:
ConduDisc® is a conductive grounding plate that dramatically enhances the performance and longevity of utility pole grounding systems. It is sold in a ready to install package. The utility pole ground plate is designed and manufactured in compliance with the CSA Standard C22.2 No. 41-13 and No. 65-13; as such meets the ESA Technical Guideline for Section 6 “Approval of Electrical Equipment” with regards to Ontario Regulation 22/04 and the construction requirements of National Electrical Safety Code (American Standard).
ConduDisc® can be used with or without ConduFlow® backfill. When using ConduFlow® with the ConduDisc®, ensure that ConduFlow® is properly mixed and poured down the hole prior to installing the grounding plate.
SAE’s Marine Electrode is a submersible grounding electrode specifically designed for applications where water bodies near utility structures provide the only viable grounding option.
The Marine Electrode offers many advantages:
SAE’s Marine Electrode is a 6′ long, 4″ diameter ground electrode that consists of a 3/4″ copperclad ground rod factory molded inside an impermeable conductive polymer. The density of the material allows the Marine Electrode to sink when placed into the water.
